Default:
300seconds
Usage Guide:
To configure ARP age time for the vlan1.
Example:
To configure ARP age time(200seconds) for the vlan1.
Switch# configure terminal
Switch (config)# interface vlan1
Switch (config- vlan1) # arp-ageing-timeout 200
4.3.7.2 end
Command:
end
end
Go back to EXEC mode
Default:
Auto
Usage Guide:
To back to EXEC mode
Example:
To back to EXEC mode
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-vlan1)# end
Switch#
4.3.7.3 exit
Command:
exit
exit
Exit from current mode
Default:
None
-49-
Command Guide