Usage Guide:
To exit current mode
Example:
To exit current mode.
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-vlan1)# exit
Switch (config)#
4.3.7.4 ip address
Command:
ip address <ip >
<ip >
IP address (e.g. 10.0.0.1/8)
Default:
192.168.0.100/24
Usage Guide:
To configure IP address for vlan1.
Example:
To configure IP address (192.168.0.100/24) for vlan1
Switch# configure terminal
Switch (config)# interface vlan1
Switch (config- vlan1) # ip address 192.168.0.100/24
4.3.8 ip dhcp snooping
Command:
ip dhcp snooping { [binding vlan <VLAN ID> interface <Port> <IP address> <MAC
address>] | database write-delay <15-86400> | errdisable recovery cause
dhcp-rate-limit | errdisable recovery interval <1-3600> | verify mac-address | vlan
<VLAN ID> }
binding vlan
<VLAN ID>
DHCP-snooping binding entry
VLAN ID
-50-
Command Guide