no
Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function
Example:
To disable the function (mac-address-table static 0033.4455.5555 vlan 1 drop)
Switch# configure terminal
Switch (config)# no mac-address-table static 0033.4455.5555 vlan 1 drop
4.3.21 service advanced-vty
Command:
service advanced-vty
Default:
Disabled
Usage Guide:
To enable the advanced mode vty interface
Example:
To enable the advanced mode vty interface
Switch# configure terminal
Switch (config)# service advanced-vty
4.3.22 service terminal length
Command:
service terminal length <lines>
<lines: 0 or 3-512>
Default:
N/A
Usage Guide:
To configure length of command display for current terminal session.
Number of lines of VTY (0 means no line control)
-60-
Command Guide