S*
0.0.0.0/0 [1/0] via 192.168.0.254, vlan1
C
127.0.0.0/8 is directly connected, lo
C
192.168.0.0/24 is directly connected, vlan1
S
192.168.1.0/24 [1/0] via 192.168.0.10, vlan1
4.14.11 show lacp
Command:
show lacp { counter | etherchannel | port | sys-id }
counter
LACP counters
etherchannel LACP channel commands
port
port commands
sys-id
sys-id - LACP system id and priority
Default:
N/A
Usage Guide:
To display the LACP counter information.
Example:
To display the LACP counter information.
Switch # show lacp counter
% Traffic statistics
Port
LACPDUs
Sent
4.14.12 show lldp
Command:
show lldp { local-information | neighbor | running-info | traffic }
local-information port commands
neighbor
running-info
port commands
traffic
LLDP traffic
Marker
Recv
Sent
Recv
LLDP neighbor information
Pckt err
Sent
Recv
-84-
Command Guide