4.3.5.39 switchport mode access acceptable-frame-type
Command:
switchport mode access acceptable-frame-type [ all | vlan-untagged ]
all
Allow all frames
vlan-untagged
Default:
All
Usage Guide:
To configure acceptable-frame-type of access VLAN for specific interface
Example:
To configure acceptable-frame-type (all) of access VLAN for ge4
Switch# configure terminal
Switch (config)# interface ge4
Switch (config-if) # switchport mode access acceptable-frame-type all
4.3.5.40 switchport mode hybrid ingress-filter
Command:
switchport mode hybrid ingress-filter [disable | enable ]
disable
Disable ingress filtering
enable
Enable ingress filtering
Default:
Disabled
Usage Guide:
To configure ingress filter of hybrid VLAN for specific interface
Example:
To configure ingress filter (enabled) of hybrid VLAN for ge4
Switch# configure terminal
Switch (config)# interface ge4
Switch (config-if) # switchport mode hybrid ingress-filter enable
Allow only untagged frames
-42-
Command Guide