Ip Configuration - Planet Networking & Communication SGS-5220 User Manual

4.2.2 IP Configuration

The IP Configuration includes the IP Configuration, IP Interface and IP Routes. The configured column is used to view or
change the IP configuration. The maximum number of interfaces supported is 128 and the maximum number of routes is 32.
The screen in Figure 4-2-2
The current column is used to show the active IP configuration.
Object
•
IP Configurations Mode
DNS Server
appears.
Figure 4-2-2: IP Configuration page Screenshot
Description
Configure whether the IP stack should act as a Host or a Router. In
Host mode, IP traffic between interfaces will not be routed. In Router
mode traffic is routed between all interfaces.
This setting controls the DNS name resolution done by the switch. The
following modes are supported:
 From any DHCP interfaces
 No DNS server
 Configured
 From this DHCP interface
User's Manual of SGS-5220 Series
The first DNS server offered from a DHCP lease to a DHCP-enabled
interface will be used.
No DNS server will be used.
Explicitly provide the IP address of the DNS Server in dotted decimal
notation.
54