Installation Checklist - Nortel Remote Office 9150 Installation And Administration Manual

Planning for installation
Remote Office 9150

Installation checklist

Use this checklist to ensure that all installation tasks are completed.
Check Task
Review the Release Notes for last-minute
product updates.
Ensure you have the latest firmware and
software.
You can route calls over the IP network, the
PSTN, or both. Determine, at a high level,
what you must do to implement these call
routing methods.
If you want to use the IP network to route
calls, evaluate the IP network to determine if
the network infrastructure can support voice
traffic.
If you want to use the PSTN to route calls,
order trunks from the central office to the
Remote Office 9150 unit site.
Note: The Remote Office 9150 unit supports
ISDN BRI trunks (S/T or U interface).
Obtain the cables that you need to establish
the network connections.
Decide on the administration PC setup.
52
For details, see
Remote Office and RLC Release
Notes (NTP 555-8421-102).
Remote Office and RLC Release
Notes (NTP 555-8421-102)
"Deployment options" on page
82.
n
your data network
administrator
n
Remote Office Network
Engineering Guidelines
(555-8421-103)
"ISDN BRI information" on page
88.
"Cables you must supply
yourself" on page 59.
"Administration PC" on page 61.
Remote Office 9150
Standard 2.0
Page 1 of 4