Nortel Remote Office 9150 Installation And Administration Manual page 151

Hide thumbs Also See for Remote Office 9150:

Table of Contents

September 2001

Enter the COM port to which the Remote Office 9150 unit is connected,

and then click OK.

Result: The User Authentication for Serial Mode dialog box appears.

Type guest for the logon name.

Type guest123 for the password.

Note: This is the default password. It might be different if it was changed.

Result: The connection attempt is initiated. Trying to Connect via

Serial Port <port number> might appear.

IF the logon attempt

Installation and Administration Guide

Installing the Remote Office 9150 unit

the following message appears:

SERIAL CONNECTION FAILED

Check the serial connection and ensure it is good.

Then, go back to step 1.