Nortel Remote Office 9150 Installation And Administration Manual page 258

Configuring the Remote Office 9150 unit
8 If applicable, enter the digits that prevent a certain type of call from
proceeding in the Disabled Outbound Digit Sequence box.
9 Specify the positions of the Local Call Keys.
Note: Key 0 is not recommended for ports defined as local and remote.
Keys 8 and 9 are recommended. You can select Key 0 if the port is
configured as local only.
10 Click OK to save the information in the temporary work file.
11 To update the Remote Office 9150 unit with the new information, click
Send.
IF you are
logged on to the Remote
Office 9150 unit
not logged on to the
Remote Office 9150 unit
234
THEN
the changes are written into the Remote
Office 9150 unit's buffer.
To save the changes in flash memory, choose
Upload/Download
The Connection not Established dialog box
appears.
Do one of the following:
n Log on to the Remote Office 9150 unit,
and then click Send again.
n Save the changes to a file on your
administration PC.
Standard 2.0
Save to Flash.
Remote Office 9150