Installing the Remote Office 9150 unit
Testing the network connections
After you have installed the hardware and performed initial configuration, verify
that network connectivity is present by performing the tests described in this
section.
To verify IP network connectivity using PING
To test the Ethernet connection between the administration PC and the Remote
Office 9150 unit, you can use PING. To do this test, the Remote Office 9150 unit
and the administration PC must be physically connected to the IP network.
1
From the menu in Configuration Manager, choose Tests
Result: The PING Test dialog box appears.
2
Enter the IP Address of the unit you want to ping.
3
In the Number of Cycles box, enter the number of times you want to ping
the unit.
The number must be in the range of 1–100.
4
Click OK.
Result: The PING test results screen appears, showing the ping results.
138
Standard 2.0
Ping.
Remote Office 9150