Overview - Nortel Remote Office 9150 Installation And Administration Manual

Planning forms

Overview

This appendix provides several forms that you can use to plan and record the
various data necessary for proper configuration of a Remote Office 9150 unit at
your site.
Note: RLC forms are provided in the Reach Line Card Installation and
Administration Guide (NTP 555-8421-210).
Network planning
To help you plan your Remote Office network, study the network diagram and
sample configurations provided in Appendix B, "Sample configuration files."
The information provided in this appendix demonstrates the relationships
between RLC and Remote Office 9150 configuration settings.
Remote Office 9150 forms
Use the Remote Office 9150 forms to record information and calculate needed
resources for a Remote Office 9150 unit. For more information about using
these forms, see "Planning the configuration" on page 87.
Data entry form completion sequence
Information from some forms might need to be copied to other forms. Generally,
you should complete the data entry forms in the following sequence:
1. Remote Office 9150 Configuration Information—Stations form
2. Reach Line Card Connection Information (for either the 16-port or 32-port
RLC)
3. Remote Office 9150 Configuration Information—Network Connections
form
4. Remote Office 9150 Configuration Information—ISDN BRI Modules form
5. Remote Office 9150 Configuration Information—Dialing Plans form
342
Standard 2.0
Remote Office 9150