Nortel Remote Office 9150 Installation And Administration Manual page 175

September 2001
In some cases, selecting a particular list item causes the property sheet contents
to change as follows:
n
Some fields appear dimmed (disabled) because they cannot be configured
in the context of the list item you selected.
n
Other fields are re-enabled (no longer appear dimmed).
n
One or more values on the property sheet are replaced with values that are
specific to the item you selected.
Check boxes
Fields that contain a blank box beside them are called check boxes. These check
boxes are used to enable or disable the feature associated with that field. To
enable the feature, click the check box. A check mark appears. When you click
the check box again, the check mark disappears (thereby disabling the feature).
Option buttons
Some fields can have two or more options from which to select. The options
contain a circle beside them, which are called option buttons. For these fields,
only one option can be selected.
To enable an option, click the button for the option you need. If the option you
selected is a change, the button for the previously selected option is cleared.
In some cases, selecting a particular option button causes the property sheet
contents to change as follows:
n
Some fields appear dimmed (disabled) because they cannot be configured
in the context of the option you selected.
Installation and Administration Guide
Configuration Manager overview
151