Nortel Remote Office 9150 Installation And Administration Manual page 133

September 2001
Mounting the unit on the wall
1 Choose the location on the wall where you want to mount the Remote
Office 9150 unit.
2 Use the predrilled screw slots on the bottom of the Remote Office 9150 unit
as a guide to measure and mark the location on the wall for each mounting
screw.
The measurements between the screw slots are as follows:
n from front to back panels: 15 cm (6 in.)
n from side to side: 37.5 cm (15 in.)
Installation and Administration Guide
To route cables
to the right
37.5 cm (15 in)
15 cm (6 in)
Cables must be connected and routed away from the
Remote Office 9150 unit at a right angle
Installing the Remote Office 9150 unit
To route cables
to the left
OR
G101396
109