Configuring The Pstn Connection Number - Nortel Remote Office 9150 Installation And Administration Manual

Hide thumbs Also See for Remote Office 9150:

Table of Contents

Configuring the Remote Office 9150 unit

Configuring the PSTN connection number

The PSTN number corresponds to the dedicated network port on the RLC for

your Remote Office 9150 unit. The PSTN number to connect to the RLC must

be configured in a specific manner. If you select Caller ID as the security level,

then the PSTN number that you enter for the Remote Office 9150 unit to connect

to the RLC is compared with the telephone number configured on the RLC for

your site. If the two numbers do not match, the call is dropped.

Note: Enter the PSTN number to connect to RLC exactly as it must be dialed by

the Remote Office 9150 unit, including 1 for long distance and 9 for Centrex

trunk access.

Getting there

RLC Connection Configuration sheet

Configuration Manager

RLC Connection Configuration

Remote Office 9150

Standard 2.0