Nortel Remote Office 9150 Installation And Administration Manual page 128

Installing the Remote Office 9150 unit
Installing a module
3 Align the connectors on the module with the connectors on the Remote
Office 9150 unit circuit board.
4 Use both hands to grasp the module firmly and push down until it snaps
into place.
5 Visually inspect the module connectors to ensure there is no gap between
the module connectors and the Remote Office 9150 motherboard
connectors.
6 Ensure the module is securely installed by placing one finger beneath the
module and tugging upward. The module should not move.
104
Standard 2.0
Connector
on module
Connector
on mother board
Dongle socket
(not used)
G101404
Remote Office 9150