Configuring The Security Level - Nortel Remote Office 9150 Installation And Administration Manual

Configuring the Remote Office 9150 unit

Configuring the security level

It is recommended that you implement a security authentication method on both
the RLC and the Remote Office 9150 unit to prevent toll fraud.
The security level defines what type of security authentication is used between
the Remote Office 9150 unit and the host PBX. The information used to perform
security authentication depends on the security level chosen. There are three
levels of security:
n
No security (default setting)
n
Caller ID
n
Provision ID
For a detailed description of these security levels refer to "System security" on
page 30.
Getting there
9150
204
Configuration Manager RLC Connection Configuration
Remote Office 9150
Standard 2.0