Nortel Remote Office 9150 Installation And Administration Manual page 227

September 2001
To configure the PSTN number
1 Enable the PSTN Connection option.
2 Enter the telephone that the Remote Office 9150 unit will dial to connect to
the RLC in the PSTN Number to Connect to RLC field.
3 Click OK to save the information in the temporary work file.
4 To update the Remote Office 9150 unit with the new information, click
Send.
IF you are
logged on to the
Remote Office 9150 unit
not logged on to the
Remote Office 9150 unit
Installation and Administration Guide
Configuring the Remote Office 9150 unit
THEN
the changes are written into the Remote
Office 9150 unit's buffer.
To save the changes in flash memory, choose
Upload/Download
The Connection not Established dialog box
appears.
Do one of the following:
n Log on to the Remote Office 9150 unit,
and then click Send again.
n Save the changes to a file on your
administration PC.
Save to Flash.
203