Nortel Remote Office 9150 Installation And Administration Manual page 183

September 2001
Configuration Manager: File operations description
The following table describes each operation shown in the previous diagram:
Operation
OK
File Open
File Save As
Installation and Administration Guide
Description
When you click OK, the following occurs:
n
The changes you make are checked for errors. If errors
are found, an error dialog box appears.
Make the necessary changes, and then click OK again.
n
The changes you make are stored in the event.dat file on
your PC. For more information about the event.dat file,
see "Types of files" on page 157.
To update the flash memory of the unit to which you are
logged on, you must click Send, and then perform a Save to
Flash. For more details, see "Send" on page 160.
Note: If you do not click OK on a property sheet before
displaying another property sheet, all changes made on the
property sheet are lost and must be reentered.
When you choose File
Manager menu, you can open a previously saved
configuration file. This is useful for preparing and storing
configuration files in a central location before they are
deployed to the network.
Note: To open a file, the file type must be text (.txt).
When you choose File
Manager menu, the unit's configuration is saved to a
configuration file on your PC. You specify the file name and
directory location.
After you save the file, you can open and modify the file at
another time.
Notes:
n
The file is saved as a text (.txt) file.
n
If you close Configuration Manager without performing
a File Save As, all changes you made are lost.
Configuration Manager overview
Open from the Configuration
Save As from the Configuration
159