Nortel Remote Office 9150 Installation And Administration Manual page 78

Planning for installation
Remote Office 9150 unit
Installation checklist
Check Task
Configure the following items, as required,
to create the communication paths between
the Remote Office 9150 unit and the RLC:
n
IP network: RLC's IP address
n
PSTN:
n
RLC's telephone number
n
primary trunk
n
security level and, if required, security
identifier
Ping the Remote Office 9150 unit and ensure
that it is recognized as a device on the
network.
Ensure that the Remote Office 9150 unit's
connection information is completed on the
RLC.
Configure user stations with appropriate
calling permissions and features.
Configure ports on the RLC.
54
For details, see
n
"Using the Configuration
Wizard to perform initial
configuration" on page 124
n
"Configuring the security
level" on page 204
"Testing the network
connections" on page 138.
the Reach Line Card Installation
and Administration Guide
(NTP 555-8421-210).
"Defining stations" on page 225.
the Reach Line Card Installation
and Administration Guide
(NTP 555-8421-210).
Remote Office 9150
Standard 2.0
Page 3 of 4