Nortel Remote Office 9150 Installation And Administration Manual page 184

Configuration Manager overview
Operation
Send
Send All
Retrieve
Save to Flash
160
Description
When you click Send on the current property sheet, any
changes you make to this property sheet are sent to the
buffer on the unit to which you are connected. If the send is
successful,
Data Sent Successfully
Note: You must perform a Save to Flash from the Upload/
Download Menu to save the changes in the unit's flash
memory. For more details, see Save to Flash below.
When you choose Upload/Download
property sheet, changes for all property sheets are sent to the
buffer on the unit to which you are connected. If the send is
successful,
Data Sent Successfully
Note: You must perform a Save to Flash from the Upload/
Download Menu to save the changes in the unit's flash
memory. For more details, see Save to Flash below.
When you click Retrieve on a property sheet, the
configuration stored on the unit to which you are connected
appears in Configuration Manager.
If the retrieve is successful,
appears.
Successfully
When you choose Upload/Download
information stored in the unit's buffer is saved to flash
memory. This prevents the configuration from being lost if a
power loss occurs on the unit.
While in progress,
appears in the status bar at the bottom of the screen. When
the save to flash is completed, the Data Stored to Flash
dialog box appears.
Note: You must perform a Send or Send All before you
perform a Save to Flash. You should perform a Save to Flash
as often as required.
Data Received
Save to Flash in Progress
Standard 2.0
appears.
Send All on any
appears.
Save to Flash, the
Remote Office 9150