Part Names - Sharp AR-M237 Copier Manual

FINISHER (AR-FN5N)
When an optional finisher (AR-FN5N) is installed, the machine can automatically staple the sorted copies. Each
collated set of copies or group of copies can be stacked offset from the previous set. (Offset function p.35)

Part names

Offset tray
Specifications
Tray capacity
Paper size
Offset
Paper sizes that can be
stapled
Stapling capacity
Power supply
Weight
Dimensions
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
Note
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units and there may be some deviations from these values in individual units.
Top cover
Top tray
Stapler cover
AR-FN5N
Top tray 100 sheets
Offset tray 1,000 sheets (500 sheets for sizes larger than 8-1/2" x 11" (A4))
Top tray: 5-1/2" x 8-1/2" to 11" x 17" (A5 to A3)
Size
Offset tray: 8-1/2" x 11" to 11" x 17" (B5 to A3)
Weight 14 lbs. to 34 lbs. (52 g/m
Approx. 1" (27 mm)
8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", 11" x 17" (B5, A4, A4R, B4, A3)
30 sheets (21 lbs. (80 g/m
Drawn from the machine
Approx. 42 lbs. (19 kg)
18-33/64" (W) x 20-1/8" (D) x 21-17/64" (H)
Exit area
(470 mm (W) x 511 mm (D) x 540 mm (H))
22-9/64" (W) x 17-31/64" (D) x 4-19/64" (H)
Stapler compiler
(562 mm (W) x 444 mm (D) x 109 mm (H))
PERIPHERAL DEVICES AND SUPPLIES
Stapler compiler cover
2
to 128 g/m
2
))
2
)
6
77