Sharp AR-M237 Copier Manual page 126

BEFORE USING THE FAX FEATURE
[EXPOSURE] key (p.22)
13
Touch this key to change the scanning exposure.
The selected exposure is highlighted above the
key. The initial factory setting is [AUTO].
Address directory screen (alphabetically ordered)
If "DEFAULT DISPLAY SETTINGS" (p.96) is set to address directory, the following screen will be the initial screen
that appears when the [FAX] key is pressed.
1
Rapid key display
1
This shows the rapid keys that have been stored
on the selected "index card". The display is initially
set to show 8 keys. This can be changed to 6 or 12
using a key operator program. ("THE NUMBER OF
DIRECT ADDRESS KEYS DISPLAYED
SETTING" (p.96))
Display switching keys
2
In cases where the rapid keys cannot all be
displayed on one screen, this shows how many
screens are left. Touch the
through the screens.
[CONDITION SETTINGS] key
3
This displays the condition setting screen (p.7),
which is used to set various conditions.
The screen showed above is the alphabetical address book. If desired, the initial screen can be set to the group
Note
address book. ("DEFAULT DISPLAY SETTINGS" (p.96))
8
READY TO SEND.
A B
C D
E F
G H
FREQUENT USE ABCD EFGHI
5
keys to move
Special function icon display
14
When a special function such as polling or dual
page scan is selected, the special function icon
appears here.
2
SPEAKER
CONDITION
SETTINGS
SUB ADDRESS
ADDRESS REVIEW
JKLMN OPQRST UVWXYZ ABC
[ABC GROUP] key
4
Touch this key to switch between the alphabetical
index and the group index.
Index keys (p.78)
5
Destinations programmed in auto-dialing are
stored in indexes. In the alphabetical index, the
destinations appear in alphabetical order. In the
group indexes, the destinations appear in the order
of their control numbers. Touch the [ABC
GROUP] key to switch between indexes.
The group indexes can be used as follows:
• For storing destinations in groups. (p.67)
• A name can be assigned to each index. (p.78)
REDIAL
3
GROUP
4