Misfeed In The Upper Exit Area; Misfeed In An Output Tray; When A Finisher (Ar-Fn5N) Is Installed - Sharp AR-M237 Copier Manual

TROUBLESHOOTING AND MAINTENANCE

MISFEED IN THE UPPER EXIT AREA

(when a job separator tray kit or finisher (AR-FN5N) is installed)
If a job separator tray kit or a finisher is installed, a misfeed may occur in the upper exit area.
1
Open the upper right side cover.
2
Gently pull the misfed paper out.

MISFEED IN AN OUTPUT TRAY

(when a finisher (AR-FN5N) is installed)

1
Grasp the handle of the stapler
compiler cover and pull to open the
cover.
70
Be careful not to tear the
misfed paper during
removal.
A MISFEED HAS OCCURRED.
INFORMATION
3
Close the upper right side cover.
Make sure that the misfeed message is cleared.
2
Remove any misfed paper from the
transport area.