Sharp AR-M237 Copier Manual page 61

Message
SELECTED PAPER TRAY IS OUT
OF SERVICE.
CHECK STAPLER POSITION OR
STAPLE JAM.
(CALL FOR SERVICE SOON.)
(MAINTENANCE REQUIRED.)
CALL FOR SERVICE.
CODE:
PLEASE CHECK THE ORIGINAL
SIZE. JOB IS CANCELED.
Cause and solution
Contact your SHARP service center.
Staples are jammed in the finisher or the staple case is not
attached correctly. Check the staple case. If the message still
appears after removing the jammed staples, disable the stapler
using "DISABLING OF STAPLER" in the key operator programs
(See the "Key operator's guide.), and contact your SHARP service
center.
It will soon be time for regular maintenance. Contact your SHARP
service center.
It is time for regular maintenance. Contact your SHARP service
center.
Turn off the power and then turn it back on. If this does not clear
the message, write down the 2-digit main code and 2-digit
sub-code and promptly contact your SHARP service center.
The original in the RSPF is longer than the size that was detected.
Reinsert the original, make sure that the size indicated in the touch
panel is the same as the actual size, and begin copying. You can
also select mixed feeding to copy onto paper that matches each
original size after all originals have been scanned.
TROUBLESHOOTING AND MAINTENANCE
Page
-
74
-
-
-
-
5
59