Part Names And Functions - Sharp AR-M237 Copier Manual

PART NAMES AND FUNCTIONS

OPERATION PANEL
Operation panel keys and keys displayed on the touch panel that are used for fax are explained here.
Touch panel (p.7)
1
• Messages and keys appears in the touch panel.
A key can be touched to select or enter a setting.
• When you touch a key, a beep sounds and the
key is highlighted to indicate that it has been
selected.
• Keys that cannot be selected in a screen are
grayed out. If a grayed out key is touched, a
double beep will sound to indicate that the key
cannot be selected.
Mode select keys
2
Use to select the basic modes of the machine.
LINE light
3
This lights while a fax is being sent or received.
Numeric keys
4
Use for settings that require the entry of numbers.
[CLEAR] key ( )
5
This is used to clear a mistake when entering a
number. One digit is cleared each time the key is
pressed. The key is also used to cancel scanning
of an original.
[FAX] key (p.7)
6
Press to switch to fax mode. The initial screen of
fax mode will appear in the touch panel display.
1
COPY
PRINT
SCAN
FAX
6
2 3 4
ON LINE
DATA
DATA
LINE
DATA
JOB STATUS CUSTOM SETTINGS
ACC.#-C
7 8 9 10
[JOB STATUS] key (p.23)
7
Use to check the status of a job.
DATA light
8
This light blinks when a fax has been received to
memory.
The light stays on constantly when a fax is waiting
in memory for transmission.
[CUSTOM SETTINGS] key
9
Use to customize the machine settings to better
suit your needs. See "CUSTOM SETTINGS" in the
operation manual for copier. When using the fax
function, destinations can be stored (p.65) and
settings for fax reception (p.62) and fax forwarding
(p.29) can be selected.
[ACC.#-C] key (
10
Press to use the fax function when auditing mode
is enabled. (See "AUDITING MODE" in operation
manual for copier.) This key can also be used to
issue tone signals when the machine is connected
to a pulse dial line.
[START] key (
11
Press to begin scanning an original for fax
transmission.
[CLEAR ALL] key (
12
Use to cancel a transmission or programming
operation. When the key is pressed, the operation
is canceled and you return to the initial screen
(p.7).
When sending a fax, this key is also used to cancel
an image setting, paper size setting, or special
function.
5
11 12
)
) (p.13)
)
1
5