Printer Specifications - Sharp AR-M237 Copier Manual

4 SPECIFICATIONS

Printer specifications

Printing speed
Resolution
IMC Memory
Additional memory slots
Interface
*1 The factory default setting for memory used for the printer function is 16 MB. The proportion of IMC memory allocated to the
printer function can be changed in the key operator programs. See "MEMORY FOR PRINTER" in the key operator's guide.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
Note
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There
may be some deviations from these values in individual units.
CONTENTS
AR-M236/AR-M237: 23 pages/min.
AR-M276/AR-M277: 27 pages/min.
600 dpi
32 MB*
2 slots (maximum of 1024 MB of additional memory modules (168-pin SDRAM DIMM) can be installed)
IEEE 1284-compliant bi-directional parallel interface/USB 2.0 (Full-Speed/Low-Speed) interface
I N D E X
33