Editing And Deleting Programs - Sharp AR-M237 Copier Manual

PROGRAMMING
5
Your settings are displayed. Make
sure that they are correct.
PROGRAM
No.1 REGISTRATION IS COMPLETED.
PROGRAM FOR SHARP
PROGRAM NAME
ADDRESS 2 ADDRESSES
SETTINGS
RESOLUTION STANDARD
SPECIAL
POLLING
MODES

EDITING AND DELETING PROGRAMS

If you need to edit or delete a previously stored program, perform steps 1 through 3 on pages 65 and 66 and then
perform the following procedure:
1
Touch the [AMEND/DELETE] key.
AMEND/DELETE
2
Touch the [PROGRAM] key.
EXIT
1/1
PROGRAM
RELAY GROUP
74
NEXT EXIT
EXPOSURE AUTO
6
If you are finished storing programs,
touch the [EXIT] key.
If you wish to store another program,
touch the [NEXT] key.
If you touch the [EXIT] key, you will return to the
screen of step 4 on page 66.
If you touch the [NEXT] key, you will return to the
screen of step 1.
3
Touch the program that you wish to
edit or delete.
DIRECT ADDRESS / AMEND/DELETE
SELECT ADDRESS TO AMEND/DELETE.
PROGRAM
PROGRAM FOR SHARP EMAIL NEWS GROUP
ABYS FAX FOREMAT A
• When you touch the program name, the edit/delete
screen for the selected program appears.
• Touching the [ADDRESS BOOK] key returns you to
the screen of step 2.
DIRECT ADDRESS / AMEND/DELETE
No.1 REGISTRATION IS
PROGRAM NAME
PROGRAM FOR SHARP
ADDRESS 2 ADDRESSES
SETTINGS
RESOLUTION STANDARD
SPECIAL
POLLING
MODES
4
To edit the program, follow the same
procedure as for storing the program.
To delete the program, touch the
[DELETE] key and then touch the
[YES] key in the confirmation screen
that appears.
EXIT
ADDRESS
BOOK
RELAY GROUP
DELETE EXIT
EXPOSURE AUTO