Sharp AR-M237 Copier Manual page 111

CONFIGURING THE PC-FAX DRIVER
WHEN USING A USB CABLE (if the
PC-FAX driver is installed)
When the PC-FAX function is used with a USB cable, the port used by the PC-FAX driver must be
configured. The PC-FAX driver uses the USB port that was created when the printer driver was
installed. Configure the port after installing the printer driver (pages 3 to 9).
1
Click the "start" button, click "Control
Panel", click "Printers and Other
Hardware", and then click "Printers and
Faxes".
In operating systems other than Windows XP,
click the "Start" button, select "Settings", and
then click "Printers".
2
Click the PC-FAX driver icon and select
"Properties" from the "File" menu.
12
3
Click the "Ports" tab and select a USB
port (for example, USB001) in the list.
In Windows 98/Me, click the "Details" tab
and select USB port in the "Print to the
following port" list box.
• The USB port name will vary
Note
depending on the number of USB
ports created on your computer. If
the port created during installation of
the printer driver is your first USB
port, the name will be "USB001".
• Select the USB port being used by the
AR-M230/M270 series printer driver.
The port used by the printer driver is
indicated by a checkmark in the
"Ports" tab of the printer driver
properties window. (In Windows
98/Me, the port is selected in "Print to
the following port" in the "Details" tab.)
4
Click the "OK" button.