SPECIFICATIONS
Printer specifications
Type
Continuous printing speed
Printing resolution
Printer driver type
Supported protocols
Supported client PC
operating systems
Fonts
Interface port
Memory
Print area
*1 The standard printer driver of MX-2600G/MX-3100G.
*2 When MX-2600G/MX-3100G are used, the printer expansion kit is required.
*3 When the PS3 expansion kit is installed and the machine is used as a PostScript printer.
*4 When the XPS expansion kit is installed.
*5 Barcode font kit is required.
*6 Supported operating systems are Windows 2000 / XP / Vista.
*7 To install the XPS expansion kit, an expansion memory board is required.
16
Built-in
Same as continuous copying speed (When printing same document continuously on A4
(8-1/2" x 11") plain paper in non-offset mode, excluding processing time.)
600 x 600 dpi / 1200 x 1200 dpi
1
2
2
SPLC-c*
, PCL5c*
, PCL6*
TCP/IP, IPX/SPX, NetBEUI, EtherTalk
See "VERIFYING SYSTEM REQUIREMENTS" in the Software Setup Guide.
PCL5c, PCL6
3
PostScript 3 compatible*
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Supports USB 2.0 (Hi speed)*
Standard system memory: 512 MB
7
Expansion memory: 1 GB*
Entire page excluding margin of 4.2 mm (11/64") at each edge. The actual print area may vary
depending on the printer driver and the software application.
3
, PostScript 3 compatible*
, XPS*
80 European fonts, 28 barcode fonts*
136 European fonts
6
4
5
, 1 bitmap font