Printer Specifications - Sharp DX-2500N Operation Manual

PRINTER SPECIFICATIONS

Type
Continuous printing speed
Printing resolution
Printer driver type
Supported protocols
Supported client PC
operating systems
Fonts
Interface port
Memory
Print area
*1 When the PS3 expansion kit is installed and the machine is used as a PostScript printer.
*2 Barcode font kit is required.
*3 Required when there is insufficient memory to handle certain print data.
*4 The productivity kit is required.
Built-in
DX-2000U: 20 pages/min
DX-2500N: 25 pages/min
(When printing same document continuously on A4 (8-1/2"x11") plain paper in non-offset mode,
excluding processing time.)
600x600 dpi, 9600 equivalent x 600dpi
PCL6, PostScript 3 compatible*
TCP/IP, IPX/SPX, NetBEUI, EtherTalk*
See "VERIFYING SYSTEM REQUIREMENTS" in the Software Setup Guide.
PCL6
1
PostScript 3 compatible*
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Supports USB 2.0 (Hi speed)
Standard system memory: 1GB*
3
Expansion memory: 2GB* *
Entire page excluding margin of 4.2mm (11/64") at each edge. The actual print area may vary
depending on the printer driver and the software application.
3-80
1
, Sharp Advanced Printing Language-c
1
80 European fonts, 28 barcode fonts*
136 European fonts
4
4
PRINTER
2
, 1 bitmap font
Contents