Viewing Ties - Dxp 42; Resetting; Resetting Using The Front Panel Buttons - Dxp 44, 84, And 88 Only - Extron electronics DXP HD 4K PLUS Series User Manual

4k hdmi switchers
Hide thumbs Also See for DXP HD 4K PLUS Series:
Table of Contents

Advertisement

Viewing Ties — DXP 42

Resetting

There are several methods by which you can reset the DXP, and some of these methods
allow for four levels of resetting. The following reset methods are available on the DXP:
NOTE: Entering the E ZQQQ } SIS command or performing a mode 5 reset via the
Resetting Using the Front Panel Buttons — DXP 44, 84, and 88 only
A system reset (also known as a "hard reset") does the following:
NOTE: The system reset does not reset the internet protocol (IP) settings, replace
The front panel button reset is identical to the E ZXXX } SIS command (see the
Commands).
To view ties to an input: Press the desired input button. The button LEDs light for all
outputs that are tied to that input.
Figure 31 shows a tie between input 1 and output 1. Pressing the input 1 button causes
its LED to light. The output 1 button LED also lights, indicating that a tie exists between
input 1 and output 1.
Press an output button.
The output button LED lights.
The tied input button LED lights.
INPUTS
1
2
3
Figure 31.
Viewing Ties to an Input
To view ties to an output: Press the desired output button. The LED for the selected
output button lights. In addition, the button LEDs for the tied input and for all outputs
tied to that input light.
Front panel buttons — DXP 44, 84, and 88 only (see "Resetting the System Using
the Front Panel Buttons."
Front panel (DXP 42) or rear panel (DXP 44, 84, 88) recessed Reset button (see
Resetting Using the Front or Rear Panel Reset Button
SIS commands (see the
Reset Commands
PCS (see the DXP HD 4K PLUS Series Help File)
rear panel Reset button (see the
the current passwords (whether user-set or the factory-set serial number), leaving the
unit with no password.
Clears all ties and presets.
Clears all video and audio setup and mutes.
user-installed firmware, or reset the unit name to the factory default.
OUTPUTS
4
1
2
on page 33)
on page 57)
Reset Modes Summary
on page 34) removes
DXP HD 4K PLUS Series • Operation
Reset
32

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxp 88 hd 4k plusDxp 42 hd 4k plusDxp 84 hd 4k plus

Table of Contents