Application 2; Raise / Lower Trim - Parker AC30P Hardware Installation Manual

5-14
Installation - Control Module

APPLICATION 2:

Ideal for applications requiring speed control from multiple locations
Not Used ANIN 01 (X11/01)
Not Used ANIN 02 (X11/02)
RUN
RAISE SPEED
LOWER SPEED
RAISE/LOWER RESET
NOT COAST STOP
NOT QUICKSTOP
TRIP RESET
Raise/Lower Trim Application
This Application mimics the operation of a motorised potentiometer. Digital inputs allow the setpoint to be increased and decreased between
limits. The limits and ramp rate can be set using the keypad.

RAISE / LOWER TRIM

RAISE/LOWER
Ramp Time
1901
Reset Value
1902
Maximum Value
1903
Minimum Value
1904
DIGIN 01 (X13/02)
DIGIN 02 (X13/03)
DIGIN 03 (X13/04)
DIGIN 04 (X12/01)
DIGIN 05 (X12/02)
DIGIN 06 (X12/03)
DIGIN 07 (X12/02)
SEQUENCING LOGIC
Seq Stop Method
0484
Application 2:
"Speed Raise/Lower"
IDEAL FOR APPLICATIONS REQUIRING SPEED
CONTROL FROM MULTIPLE LOCATIONS
Ref Max Speed Clamp
1265
MIN /MAX SPEED
Ref Min Speed Clamp
1264
F
V
CURRENT LIMIT
V/F SHAPING
I FDBK
Vhz Shape Rated Motor Current
0455
0422
Base Frequency
0457
Fixed Boost
0447
Acceleration Time
0486
RAMP
Deceleration Time
0487
Stop Ramp Time
0504
Quickstop Ramp Time
0508
F
V
PWM CONTROL
SPEED DEMAND
ANOUT 01 (X11/03)
ANOUT 02 (X11/04)
MOTOR CURRENT
FEEDBACKS
RELAY 01
(X14/01)
if AC30V
(X14/02)
OR
RELAY 11 (X23/01)
Requires IO Option
(X23/02)
7004-01-00
RELAY 02
(X14/03)
if AC30V
(X14/04)
OR
RELAY 12
(X23/03)
Requires IO Option
(X23/04)
7004-01-00
AC30 series Variable Speed Inverter
RUNNING
NOT
TRIPPED