Appendix F: Technical Specifications - Control Modulef-1; Environmental Details - Parker AC30P Hardware Installation Manual

Variable speed drive
Hide thumbs Also See for AC30P:
Table of Contents

Advertisement

Technical Specifications - Control Module
Appendix F:

ENVIRONMENTAL DETAILS

Operating Temperature
Storage Temperature
Shipping Temperature
Product Enclosure Rating
Altitude
Humidity
Atmosphere
Climatic Conditions
Chemically Active
Substances
Vibration
Operating temperature is defined as the surrounding air temperature of the drive, when the drive and other equipment
adjacent to it is operating at worst case conditions.
NORMAL DUTY (ND): 0°C to 40°C, derate up to a maximum of 50°C
HEAVY DUTY (HD): 0°C to 45°C, derate up to a maximum of 50°C
Output power is derated linearly at 2% per degree centigrade for temperature exceeding the maximum rating for the
drive.
Maximum operating temperature of the AC30D in the 24V dc supplied operating mode, without power applied to the
stack, is 45°C.
-25°C to +55°C
-25°C to +70 °C
IP20 – remainder of surfaces (Europe)
UL (c-UL) Open Type (North America/Canada)
If greater than 1000m above sea level, derate by 1% per 100m to a maximum of 2000m
Maximum 85% relative humidity at 40°C non-condensing
Non flammable, non corrosive and dust free
Class 3k3, as defined by EN60721-3-3
For the standard product (which inherently includes our optimal level of conformal coating) compliance with EN60721-
3-3 is as follows –
a) Both classes 3C3 and 3C4 for hydrogen sulphide gas (H
b) Both classes 3C1 (rural) and 3C2 (urban) for all nine defined substances as defined in table 4.
Classes 3C1 and 3C2 are valid for both storage and transportation purposes.
Note: Product was tested and validated with a hydrogen sulphide environment of 25ppm for a continuous period of
1200 hours and validated throughout the test period without failure.
Test Fc of EN60068-2-6
10Hz<=f<=57Hz sinusoidal 0.075mm amplitude
57Hz<=f<=150Hz sinusoidal 1g
10 sweep cycles per axis on each of three mutually perpendicular axis
Technical Specifications - Control Module
S) at a gas concentration of 25ppm for 1200 hours.
2
F-1
AC30 series Variable Speed Drive

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ac30 seriesAc30vAc30d

Table of Contents