Control Module Cabling Bracket (Optional) - Parker AC30P Hardware Installation Manual

CONTROL MODULE CABLING BRACKET (OPTIONAL)

Cabling brackets are available for the AC30 series control modules. These are listed in the 'Chapter 7: Associated Equipment – Control Module'
section.
To fit the Cabling Brackets:
1. Remove the GKP/Blanking Plate (if fitted) and control module cover as instructed on page 5-3.
2. Secure the Cabling Bracket to the control module casting using the fixings provided.
AC30 series Variable Speed Inverter
Installation - Control Module
Control cable wiring
bracket
5-23