Appendix D: Ac30 Series Product Codes; Understanding The Product Code; Ac30 Series Control Module - Parker AC30P Hardware Installation Manual

AC30 Series Product Codes
Appendix D:

Understanding the Product Code

The unit is fully identified using an alphanumeric code. This records how the inverter was calibrated, and its various settings when dispatched
from the factory. This can also be referred to as the Product Code.

AC30 SERIES CONTROL MODULE

Typical example: 30V-2S-0000 (as shown in the "Order example" above).
This shows the product is an AC30 series versatile controller, with Graphical Keypad fitted, standard 3C3 conformal coating and no special
options.
Note: This product code is for the control module only. The power stack must be ordered in addition to this (see page D-2).
1 2
30 V
Order example
1 Device Family
30 AC30 series control module only (no power stack)
2 Industry
V Standard controller
P Advanced controller
D Advanced controller with dual encoder system option
3 Graphical Keypad
1 Blanking cover fitted
2 Graphical keypad fitted
4 Environmental Coating
S Standard 3C3 coating
5 Special Options
0000
No special options
3 4 5
- 2 S - 0000
AC30 Series Product Codes
AC30 series Variable Speed Drive
D-1