Ethernet Communications Cable - Parker AC30P Hardware Installation Manual
Variable speed drive
Hide thumbs
Also See for AC30P:
- User's product manual (161 pages) ,
- Product manual (82 pages) ,
- Safety & quickstart booklet (28 pages)
Table of Contents
Advertisement
5-24
Installation - Control Module
ETHERNET COMMUNICATIONS CABLE
The inverter comes with built-in Ethernet providing communications with the PC programming tools PDQ and PDD, a Modbus TCP server and a
web server.
The AC30V control module has one in-built Ethernet port, the AC30P & D have two.
HA503711U003 'Chapter 8: Ethernet' provides details on how to setup the Ethernet communications port.
Connecting the Ethernet Cable – AC30V
Insert the Ethernet cable into the
RJ45 socket located behind the
top moulding of the AC30V.
To remove the Ethernet cable:
1. Remove the GKP/Blanking Plate.
2. Insert a screwdriver into the hole in the moulding (as
shown in the diagram) to release the tab on the
Ethernet cable plug and pull the cable away.
AC30 series Variable Speed Inverter
Advertisement
Table of Contents
