Canadian Compliance; North American And Canadian Compliance Information - Parker AC30P Hardware Installation Manual

A-22
Compliance

CANADIAN COMPLIANCE

Products have been approved to UL508C - Standard for Safety, Power Conversion Equipment, and to the Canadian Standard CSA 22.2 No. 274
- Adjustable speed drives.

NORTH AMERICAN AND CANADIAN COMPLIANCE INFORMATION

Motor Base Frequency
PMAC and Induction motor modes are identical.
Drive Protection
Branch Circuit Protection
It is recommended that UL Listed fuses are installed upstream of the drive.
Refer to 'Chapter 6: Associated Equipment – Power Stack' for recommended fuse ratings.
Solid-State Motor Overload Protection
This product provides Class 10 motor overload protection. The maximum internal overload protection level (current limit) is 180% for 3 seconds,
in addition Heavy Duty mode is 150% for 60 seconds and Normal Duty mode is 110% for 60s in.
Refer to HA503711U003 'Appendix C: Programming' for more information on the current limit operation and user adjustment.
An external motor overload protective device must be provided by the installer where the motor has a full-load Ampere rating of less than 50% of
the drive output rating or when the Disable Stall trip is enabled; or when the Stall time parameter is increased above 480 seconds.
Refer to HA503711U003 'Appendix C: Programming' for more information on the stall trip.
Motor over temperature sensing is not provided by the product unless the external temperature sensor is connected to the motor thermistor input
on the GPIO option. When the GPIO option is not fitted an external motor over temperature device is required.
Drive Switching Maximum Output
Frequency (kHz) Frequency (Hz)
4 500
8 590
12 590
16 590
Exceptions:
None.
1000Hz subject EU Export Control Annex I to
Council Regulation (EC) No. 428/2009.
1500Hz subject EU Export Control Annex I to
Council Regulation (EC) No. 428/2009.
1500Hz subject EU Export Control Annex I to
Council Regulation (EC) No. 428/2009.
AC30 series Variable Speed Inverter