Ac30 Series Control Features - Parker AC30P Hardware Installation Manual

AC30 Series Control Features

The inverter is fully featured when controlled using the optional Keypad (or a suitable pc programming tool).
General Motor Control Modes
AFE Mode
Voltage Boost for V/F control
Skip Frequencies
Preset Speeds
Stopping Modes
S Ramp and Linear Ramp
Raise/Lower
Jog
Diagnostics
Inputs/ Analog Inputs
Outputs
Analog Outputs
Digital Inputs
Digital I/O
Relay Outputs
Reference Voltages
Aux Supply
Encoder Inputs
Encoder Supply Outputs
Encoder Outputs
Comms On-board Ethernet
- Induction motor:
- V/F control
- Sensorless Vector Control
- Closed Loop Vector Control (with encoder option)
- Closed Loop Vector Control (with resolver option)
- PMAC motor:
- Sensorless Vector Control
- Closed Loop Vector Control (with encoder option)
- Closed Loop Vector Control (with resolver option), though with power constraints
4Q Regen Control (with encoder option)
0-25%
Skip frequencies with adjustable skip band width
User selectable preset speeds
Ramp, Coast, DC Injection, Quickstop
Symmetric or asymmetric ramp up and down rates
Programmable MOP function
Programmable jog speed
Full diagnostic and monitoring facilities
2 configurable inputs: 1 voltage or current, 1 voltage only
2 configurable outputs: 1 unipolar voltage or current, 1 bipolar voltage only
3 configurable 24V dc inputs
4 configurable 24V dc current sourcing outputs/digital inputs
2 configurable relay output (AC30V only)
+/-10V dc outputs, user +24V dc output
+24V dc input
2 separate encoder input channels: A, /A, B, /B, Z, /Z (AC30D only)
1 selectable encoder output supply voltage, shared by the two encoder channels (AC30D only)
1 encoder transmit channel: A, A/, B, /B, Z, /Z (AC30D only)
1 port (AC30V only)
2 ports
3-5
Product Overview
AC30 series Variable Speed Inverter