Terminal Cover Removal - Parker AC30P Hardware Installation Manual

4-4
Installation - Power Stack

TERMINAL COVER REMOVAL

The bottom terminal cover will need to be removed prior to connecting any AC line input cables to or motor output cables from the inverter:
The top terminal cover will need to be removed in order to connect the DC link input cables or brake cables (Frame K only) to the inverter.
On the Frame K, the front panel must be removed prior to the removal of the top terminal cover (see page 4-12):
Unscrew the 4x fixings (3x Frame K)
to remove the bottom terminal cover.
Unscrew the 5x fixings (4x Frame K)
to remove the top terminal cover.
AC30 series Variable Speed Inverter