5-4
Installation - Control Module
CONTROL MODULE REMOVAL
If it is required that the control module is to be removed from the power stack, then having first removed the control module cover and Comms
card (if fitted), as outlined on pages 5-3 and 5-26 respectively:
2.
Lift lower edge of assembly.
Note that there are two
screws used to retain the
AC30D control module.
1.
Unscrew captive screw.
4.
Lift assembly away from Power Stack
3.
Slide assembly
upwards, as far as
possible, to unlatch
from unit.
AC30 series Variable Speed Inverter