Chapter 7: Associated Equipment - Control Module; Cabling Brackets; Option Cards - Parker AC30P Hardware Installation Manual

Associated Equipment - Control Module
Chapter 7:

Cabling Brackets

The following AC30 series control module cabling bracket kits are available from Parker:
* = If a power stack cabling bracket kit is purchased for Frames D-J, the kit comes inclusive of the AC30V/P control module cabling bracket.
For installation information see 'Chapter 5: Installation – Control Module'.

Option Cards

There are a range of Option Cards that are available for customer fitting to an AC30 series control module:
Refer to the Technical Manual for detailed instructions.
For installation information see 'Chapter 5: Installation – Control Module'.
AC30 series Variable Speed Inverter
AC30
Control
Module
AC30V
AC30P
AC30D
See HA503711U001 'Chapter 6: Associated Equipment – Power Stack' for part numbers.
Product Code Description
General Purpose I/O Option (GPIO):
- Digital Inputs/Outputs (x4)
- Analogue Inputs (x3)
7004-01-00
- Motor Thermistor (x1)
- Volt-free Relay Outputs (x2)
- Real-Time Clock
Thermistor Option:
7004-02-00
- Motor Thermistor Input (x1)
Pulse Encoder Feedback Option:
7004-04-00
- Thermistor input (x1)
Resolver Feedback Option:
7004-05-00
- Thermistor input (x1)
Associated Equipment - Control Module
Cabling Bracket Kit
Part Number
LA501772U001*
LA501772U001*
LA501935U007
Manual Reference
HA501836U001
HA501836U001
HA502217U001
HA503540U001
7-1