Safety; Hazards To Personnel; Application Risk - Parker 890SD Quick Start Manual

Standalone drive

Hide thumbs Also See for 890SD:

Table of Contents

Safety

IMPORTANT

Please read this information BEFORE installing the equipment.

This manual is for anyone

installing, operating and

servicing this unit.

WARNING!

This equipment can endanger life through rotating machinery and high voltages. Failure

to observe the following will constitute an ELECTRICAL SHOCK HAZARD.

Metal parts may reach a temperature of 70 degrees Centigrade in operation.

Before working on the equipment, ensure isolation of the mains supply from terminals

L1, L2 and L3. The equipment contains high value capacitors which discharge slowly after

removal of the mains supply. Wait for at least 3 minutes for the dc link terminals (DC+ and

DC-) to discharge to safe voltage levels (<50V). Measure the DC+ and DC- terminal

voltage with a meter to confirm that the voltage is less than 50V.

Do not apply external voltage sources (mains supply or otherwise) to any of the braking

terminals (DBR+, DBR-, DC+, INT or EXT).

The specifications, processes and circuitry described herein are for guidance only

and may need to be adapted to the user's specific application.

Parker Hannifin Manufacturing Limited does not guarantee the suitability of the

equipment described in the Manual for individual applications.

Page 5

Table of Contents

890