Ac30 Series Power Stack - Parker AC30P Hardware Installation Manual

D-2
AC30 Series Product Codes

AC30 SERIES POWER STACK

Order example
1 Device Family
710
740
2 Voltage
4
3 Frame Size and Current Rating
D0004
D0006
D0010
D0012
E0016
E0023
F0032
F0038
F0045
G0045
G0060
G0073
H0087
H0105
H0145
J0180
J0205
J0260
Typical example: 710-4D0004-BE-0S-0000 (as shown in the "Order example" above).
This shows the product is an AC30 series AC line fed Frame D power stack, IP21 standard, rated at 400-480 volts supply, 1.1kW (normal duty),
with brake switch fitted, Category C3 EMC filter, no Graphical Keypad fitted, standard 3C3 conformal coating and no special options.
Note: This product code is for the power stack only. The control module must be ordered in addition to this (see page D-1).
AC30 series Variable Speed Drive
1 2 3
710 - 4 D 0004
AC Power stack only (no control module)
DC Power stack only (no control module)
400 V nominal supply system (AC line)
(normal / heavy duty)
1.1 kW / 0.75 kW
2.2 kW / 1.5 kW
4 kW / 3 kW
5.5 kW / 4 kW
7.5 kW / 5.5 kW
11 kW / 7.5 kW
15 kW / 11 kW
18.5 kW / 15 kW
22 kW / 18.5 kW
22 kW / 18.5 kW
30 kW / 22 kW
37 kW / 30 kW
45 kW / 37 kW
55 kW / 45 kW
75 kW / 55 kW
90 kW / 75 kW
110 kW / 90 kW
132 kW / 110 kW
4 5 6
- B E - 0
3 Frame Size and Current Rating (cont'd)
(normal / heavy duty)
K0315 160 kW / 132 kW
K0380
200 kW / 160 kW
K0440
250 kW / 200 kW
L0530
280 kW / 250 kW
L0590
315 kW / 280 kW
M0650
355 kW / 315 kW
M0700 400 kW / 355 kW
N0790 450 kW / 400 kW
4 Brake Switch
N Without brake switch (Frames LMN only)
B Brake switch fitted (Frames D-K only)
5 EMC Filter
(1)
N No filter fitted
E Category C3 filter fitted (standard)
F Category C2 filter fitted (Frames D-H only)
6 Graphical Keypad
0 No keypad fitted
7 Environmental Coating
S Standard 3C3 coating
8 Special Options
0000 No special options
(1) 1. Only EMC filter option N is valid on 740 products.
(1)
2. Only EMC filter option E is valid on Frame sizes K, L, M & N 710 products.
7 8
S - 0000