Appendix A: Using The 6901 Keypad - Parker 890SD Quick Start Manual

Appendix A: Using the 6901 Keypad

The 6901 keypad has a two-line backlit LCD display with units and
symbols. It can be used to setup and configure the 890 in plain
language. It can also be used to operate the drive in Local mode
from its Start and Stop buttons, Jog and reverse.
To display the Software Version and
Voltage Rating:
Press repeatedly to display the
Welcome Screen
Press to return to the Menus
To Start in
Local Mode:
Press
Menus :
Parameters :
Edit
To change Operating Mode:
From power-up, the keypad displays the Software Version, and then times-out to show the Remote
Setpoint.
Mode Action
Toggle between modes using the L/R key
Remote to Local
SEQ and REF LEDs are On when in Local
Toggle between modes using the L/R key
Local to Remote
SEQ and REF LEDs are Off when in Remote
Page 18
To Stop in
Local Mode:
Press
sub-menu or
exit a menu
parameter
exit
make writable
parameter
show PREF
stop editing
(hold)
SEQ and REF LEDs are On
when in Local mode
scroll up scroll down
previous next
parameter parameter
increment decrement
value value