Agilent Technologies 1290 Infinity User Manual page 279

3 Type
Table 20
Value
?
/
ip <x.x.x.x>
sm <x.x.x.x>
gw <x.x.x.x>
exit
4 To change a parameter follows the style:
1290 Infinity Quaternary Pump User Manual
? and press enter to see the available commands.
Figure 44 Telnet Commands
Telnet Commands
• parameter value, for example:
ip 134.40.27.230
Then press [Enter], where parameter refers to the configuration parameter
you are defining, and value refers to the definitions you are assigning to
that parameter. Each parameter entry is followed by a carriage return.
Description
displays syntax and descriptions of commands
displays current LAN settings
sets new ip address
sets new subnet mask
sets new default gateway
exits shell and saves all changes
LAN Configuration
Manual Configuration
13
279