In This Guide...
This manual covers the Agilent 1290 Infinity Quaternary Pump (G4204A).
1 Introduction
This chapter gives an introduction to the module, instrument overview and
internal connectors.
2 Site Requirements and Specifications
This chapter provides information on environmental requirements, physical
and performance specifications.
3 Installing the Module
This chapter gives information about the preferred stack setup for your
system and the installation of your Agilent 1290 Infinity Quaternary Pump.
4 Using the Module
This chapter explains the operational parameters of the Agilent 1290 Infinity
Quaternary Pump.
5 How to Optimize the Performance of Your Module
This chapter gives hints on how to optimize the performance or use additional
devices.
6 Troubleshooting and Diagnostics
Overview about the troubleshooting and diagnostic features.
7 Error Information
This chapter describes the meaning of error messages, and provides
information on probable causes and suggested actions how to recover from
error conditions.
1290 Infinity Quaternary Pump User Manual
In This Guide...
3