KTM 990 Adventure Repair Manual page 75

1
2
6
4
7
– Position the side stand.
– Tighten the screw
– Create the plug-in connection of the side stand switch and secure
3
– Mount both side covers
– Fill coolant into the radiator, compensating reservoir and engine: see
– Fill in engine oil: see Chapter 12.
– Position the tank on the motorcycle and screw it in place.
– Create the connection
– Create the fuel connection
– Mount the fuel hoses and open the fuel taps
5
– Position the side covers and screw them in place
– Mount the seat and take down the motorcycle.
– Before taking a test ride, check all hose connections for tightness.
– Check that all hoses, lines and cables are correctly seated.
and the nut
1
the cable with cable binders.
.
3
Chapter 12.
4
sender.
5
with 45 Nm (+ Loctite 243).
2
of the gasoline pump and tank gauge
by connecting the two lines.
.
6
.
7
3-44