KTM 990 Adventure Repair Manual page 45

1
2
5
4
6
9
8
1
3
5
5
7
9
– Expose the electric lines of the lambda probes at the front and rear
and disconnect plug-in connections
– Unscrew both nuts on the front exhaust manifold flange on the
2
cylinder head, loosen the exhaust clamp
manifold, pull the front exhaust manifold out of the rear exhaust
pipe and remove.
– Unscrew the rear exhaust manifold from the cylinder head.
– Disconnect the electric connections from the fan motor and the
temperature switch .
4
– Drain the cooling liquid from the radiator and engine: see
Chapter 12.
– Detach the water hoses from the radiator (special pliers
600.29.057.100) and unscrew the radiator
NOTE: fan and radiator shield do not need to be dismounted from the
radiator.
– Pull off the oil lines from the oil tank to the valve covers
return line
7
unscrew the oil tank valve
ring.
– Loosen the fixing bolts
9
carefully pull out the oil line.
.
1
on the front exhaust
3
.
5
(special pliers 600.29.57.100),
on the oil tank and remove the seal
8
on the oil tank, remove the oil tank and
3-14
and the
6