Table of Contents
Advertisement
1
3
4
5
7
– Mount the throttle cable duct
– Screw on the left side cover of the lower air filter box together with
the bracket
– Connect the hose on the rear vacuum sensor.
2
– A
LWAYS REPLACE THE VACUUM HOSES ON THE INTAKE MANIFOLD IF THEY WERE
PULLED OFF
– D
O NOT USE SILICONE SPRAY WHEN MOUNTING THE VACUUM HOSES
DAMAGE THE MANIFOLD AIR PRESSURE SENSORS
– D
O NOT EXCHANGE THE CONNECTIONS ON THE INTAKE MANIFOLD WITH THE
CONNECTIONS ON THE
LIKELY TO MALFUNCTION
– Screw on the right side cover of the lower air filter box together with
the bracket
– Mount the intake snorkel
screw on.
– Mount the air filter and the intake trumpet
– Mount the upper air filter box half and screw on, connect the vent
hose and SLS hose, attach the intake temperature sensor.
– Mount the secondary air system valve on the lower air filter box and
connect.
– Mount the radiator compensating tank, connect the short hose
the radiator, run the longer hose
over the air filter box to the left side of the motorcycle and continue
along the frame to behind the battery case.
6
.
1
for the vacuum hose to the rear vacuum sensor.
2
!
CAUTION
.
950 A
DVENTURE OTHERWISE THE INJECTION SYSTEM IS
.
for the secondary air system hose.
3
and frame on the air filter housing and
4
7
3-30
!
. I
T CAN
.
.
5
6
in front of the intake snorkel
to
Advertisement
Table of Contents
Troubleshooting
