Table of Contents
Advertisement
3-23
2
2
1
1
2 2
5
5
5
7
8
– Fill cooling liquid into the radiator, compensating tank and engine:
see Chapter 12.
– Fill engine oil: see Chapter 12.
– Attach both tanks and fix them with the screws
– Connect the tank line.
– Mount the lower tank compartment and screw on the fuse box
Mount the fuse box cover.
4
– Connect the tank gauge sender to the right tank and connect the
vent hoses.
– Mount screws
3
– Connect the front turn signal and attach the vent hoses to the tanks.
Fasten both side covers with the bolts
– Mount the upper tank compartment and fasten with the bolts
– Close the tank compartment lid and mount the seat.
6
6
– Remove the center stand lock
bump rubber and remove the center stand
– Check all hose connections for leakage before you take a trial run.
– Check all hoses, lines and cables for a proper fit.
(M8x55) and
(M8x50) and open the fuel taps.
3
4
and tighten.
5
600.29.055.000, remount the left
7
(M8x40).
1
.
2
.
6
.
8
Advertisement
Table of Contents
Troubleshooting
